GPIO - CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Transmission With SMA Antenna Wireless Transceiver Module
GPIO - CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Transmission With SMA Antenna Wireless Transceiver Module
Estimated Delivery Time: 25-35 Days
SPECIFICATIONS
Type: CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Trans
Style: CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Trans
Size: CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Trans
Output Type: CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Trans
Model Number: CC1101 10mW Wireless Module 433MHZ 868MHZ 1.8-3.6V Long Distance Trans
Explanation:
Using the chip CC1101, it can be widely used in the Internet of Things, industrial control, medical treatment, security alarm, data acquisition, smart home, water and electricity meter reading and other occasions.
DC1.9~3.6V 433MHZ 10mW
Features:
1. Adopt SPI interface.
2. Low current consumption: 15.6mA in receive mode, less than 0.5uA in sleep mode.
3. Wireless wake-up function; support low-power electric carbon wave activation function, wireless wake-up low-power sleep state devices.
Specification:
Maximum power: 10mW
Center frequency: 433MHZ
Working voltage: DC1.9~3.6V
Working temperature: -30℃~85℃
Receive sensitivity: -116dBm/0.6kbps
Communication distance: 380 meters
Overall length: 68.00mm (including antenna)
The open transmission distance is 300 meters to 500 meters.
Pin function:
GND: negative power supply
VCC: positive power supply
CSN: module chip select pin (used to start an SPI communication)
SCK: module SPI bus clock
MOSI: Module SPI data input pin
MISO: module SPI data output pin
GDO0: module information output pin
GDO2: module information output pin
433MHZ Red
Specification:
Color: red
Chip: CC1101
Center frequency: 433M
Maximum power: 10mW
Remote control distance: kilometers
1.8-3.6V 433Mhz
Specification:
Low power consumption
Working voltage: 1.8-3.6V
Default working frequency: 433Mhz
Maximum transmit power: 10 (+10dBm)
Supports 2-FSK, GFSK and MSK modulation
Receiver sensitivity -110dBm at 1200 baud
Separate 64-byte RX and TX data FIFO buffers
Instantaneous maximum operating current: <30mA
Minimum working speed 1.2kbps, maximum 500kbps
Fast frequency synthesizer with proper frequency hopping system
Built-in hardware CRC error detection ensures reliable data transmission
Support RSSI signal strength detection and carrier sense function
Registered address (256) operating frequency can be programmed via SPI
Programmable output power for all supported frequencies up to +10 dBm
WOR function can be set to standby, proportional receive state timer switching time to reduce power consumption
868MHZ 1.8V–3.6V
Specification:
Efficient SPI interface
Support radio wake-up
Low power supply (1.8V–3.6 V)
Multi-channel transceiver@868MHz
Support FSK, GFSK, ASK/OOK and MSK
Configurable data rates: 1.2k to 500kps
Independent 64-byte RX and TX data FIFOs
Support automatic interference-free channel evaluation
Application:
Low power telemetry
Wireless sensor network
Home/Building Automation
Wirelessly adjustable lights
Two-way remote keyless entry
Industrial Control and Monitoring
Wireless Alarm and Security System
AMR-Automatic Meter Reading System